User`s guide

Server Software Release Notes – Release 6.9.7.1
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2009 Allworx Corp. All Rights Reserved
Revised: February 17, 2009
Page 8
Known Issues
Defect
Number
6x 10x 24x Problem
Description
Fix
Plan
4206
9 9 9
When a user’s Presence is set
from within the Admin tool, the
wrong Presence is used.
Workaround: Set the user’s Presence
from their phone or on their My Allworx
Manager page.
Will be fixed in a future release
4188
9
If a CO DID line definition is
deleted. The FXO port cannot be
used.
If deleting the DID line cannot be
avoided, call Allworx Customer Support.
Will be fixed in a future release
4185
9 9 9
The BLF PFK auto-assign button
is disabled if no Outside Lines or
only SIP trunks are defined on the
system.
If only a few BLF PFKs are to be
assigned, assign them manually. If this
is not convenient, temporarily define a
fictitious analog (CO) outside line, then
configure the PFKs. After configuration
is complete, delete the outside line
definition.
Will be fixed in a future release
4181
9 9 9
With RBS Loop-start signaling,
DNIS is not displayed until the
phone is answered
Will be fixed in a future release
4168
9 9 9
With Automatic Multi-Site Routing,
if a call from a remote site goes to
an extension with a Follow Me
route, the Follow Me call cannot
be placed through an outside line
on the remote site.
Set up a system extension on the
remote site to dial the Follow Me call.
Route the local extension to dial the
remote site Follow Me extension.
Will be fixed in a future release
4166
9 9 9
With Automatic Multi-Site Routing,
if a call is received from a remote
site, it cannot be transferred back
to an outside line on the remote
site.
Set up a system extension on the
remote site to dial the outside phone
number. Transfer the call to the remote
system extension.
Will be fixed in a future release
3490
9 9 9
The maximum number of Static
Routes that can be handled by
the server is 10.
Workaround: Do not add more than 10
Static Route entries.
3128
9 9 9
Firewall rules that map a WAN
port to a private LAN IP address
only works if the Global Port
specified and Local Port specified
are the same.
Workaround: When a LAN service is
mapped to the Ethernet WAN interface,
configure the LAN service to run on the
desired public port number so that both
the public and private port numbers are
the same.