Installation guide
10x Installation Guide
3 Chassis Views
Figure 1: Front Chassis View
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2007 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems. All other names may be
trademarks or registered trademarks of their respective owners.
Revised: February 7, 2007
Page 3
1
10
9 8
7
5
6
4
3
2
1 Power switch
Press & Release – Normal shutdown within a few seconds
Press & Hold – Forced shutdown
2 Front panel LEDs.
Power – Indicates system start up activity
Drive – Indicates drive activity
Alert – Indicates drive or other system fault condition
3 RJ-45 10BaseT/100BaseTX Auto-Sensing Auto-MDI/MDIX switched Local Area
Network Ethernet ports.
4 Safe Mode Reset Button
5 RJ-45 10BaseT/100BaseTX Auto-Sensing Auto-MDI/MDIX Wide Area Network
port.
6 RJ-11 Power Fail analog phone connector
7 RJ-11 dedicated loop-start FXO ports for central office connection (Ports 1-3)
8 RJ-11 loop-start FXO for central office connection or FXS universal telephone
auto-sensing ports for analog extension connection (Ports 4-9)
9 RJ-11 FXS ports for analog or fax extension (Ports 10-16)
10 3.5 mm stereo audio mini jacks for music-on-hold and overhead paging