User`s guide

Allworx Server Administrator’s Guide Version 7.6
Page 76 1-866-ALLWORX * 585-421-3850
www.allworx.com
Revised: 11/22/13
Paging Mode*
Specify the conditions for hearing pages on this
handset. The choices are:
• Pages Always Accepted.
• Pages Never Accepted.
• Pages Only Accepted when the station is on-hook.
Yes No
Phone Status
Visibility
Controls how this phone displays in Call Assistant and
Allworx Interact Directory tab. The options are:
• Normal – The extension and the phone’s status are
displayed
• Hide Status – The extension is displayed and the
phone’s status always shows as Idle
• Hide Completely – Neither the extension nor the
status is displayed.
Yes No
Redial
Memory*
Sets the length of time the redial memory persists in the
phone station. Adjusting this setting is useful to maintain
privacy on phones used in shared areas.
Yes No
RTP Media
Port Range
Specifies the range of UDP ports used for Real Time
Packet communications. Using a maximum range of
values makes the phone the most secured from
snooping and denial of service activities. When placing
remote phones behind third-party firewalls, under
certain conditions the UDP port range may need to be
greatly restricted to create mapping rules for each
phone behind the firewall. See “Remote Allworx Phones
and Port Expanders” on page 143 for more information.
Yes No
SIP NAT
Keep-alive
Interval
Some NAT firewalls automatically time out and close
connections to devices it protects. If a remote phone is
behind such a firewall, then this setting prevents the
timeout. The phone sends messages called keep-alive
packets to the Allworx server at the specified frequency.
Set the value to an interval that is shorter than the
firewall timeout.
Yes No
SIP Port
UDP port number used for the SIP protocol by the
phone. Use the default value of 5060 unless the
handset is behind a third-party firewall and the network
requires a different value.
Yes Yes
Handset
Network
Template
Select a Handset Network Profile Template to download
to the handset.
Yes No
Network
Settings
Controls whether the handset uses the selected
Network Template or rely on the network settings
entered on the phone.
Yes No
Setting Description
Applies to
Allworx
Handsets
Allworx
Reach App