User`s guide

Allworx Server Administrator’s Guide Version 7.6
Page 70 1-866-ALLWORX * 585-421-3850
www.allworx.com
Revised: 11/22/13
4. Reboot the phone after changing any settings on the View Configuration page to
update the phone to the new settings.
The Allworx Server Administrator can do this using the Reboot link described
above or manually from the phone.
11.1 View the Configuration
1. Log in to the Allworx server admin page, navigate to Phone System > Handsets,
and locate the SIP Handsets section.
Replace
Enable substituting the phone with another
phone. The Replace feature transfers all of the
original phone configuration parameters and
settings to the new phone. Use this function to
replace a defective handset with a new one. If
the replacement has fewer PFKs than the
original handset, the system copies the PFKs
defined on the original handset, in order from
the bottom, left of the PFKs, up to the number
of PFKs on the replacement handset. The
system replaces original unsupported handset
PFK definitions on the replacement handset
with default values.
Yes No No
IP Address
This is the IP address assigned to the handset.
Click the link to open the Phone Administration
page in a separate browser window, if the PC
has a network communications path to the
phone; see “Phone Web Administration” on
page 92 for more information.
Yes No No
Setup
Display the Allworx Reach Installation
Assistance website.
No Yes No
Modify
Enable modification of handset Call
Appearance parameters.
Yes Yes Yes
Delete
Delete the Call Appearance from the phone. If
there is only one Call Appearance, the server
deletes the phone from the system.
Yes Yes Yes
Ring
Ring the phone. Use this function to test the
phone connection is operational.
Yes Yes Yes
Phone
Function
Description
Applies to
Allworx
Desk
Phone
Allworx
Reach
App
Generic
SIP
Phone