User`s guide

Allworx Server Administrator’s Guide Version 7.6
1-866-ALLWORX * 585-421-3850 Page 69
www.allworx.com
Revised: 11/22/13
11 Configure Allworx Phones
To configure Allworx IP phones:
1. Log in to the Allworx server admin page, navigate to Phone System > Handsets,
and locate the SIP Handsets section.
2. Check the Show boxes for Allworx Handsets and Allworx Reach Handsets. The
table lists all installed Allworx desk phones and Allworx Reach handsets.
3. Update the settings appropriately:
Phone
Function
Description
Applies to
Allworx
Desk
Phone
Allworx
Reach
App
Generic
SIP
Phone
Handset
Preference
Group Name
Name of the Handset Preference Group
assigned to the phone. PBX Station (Default) is
the default system setting. Clicking the link
displays the settings of the group. See
“Handset Preference Groups” on page 72 for
more information.
Yes Yes No
View
Configuration
Enable viewing and modifying the phone PFK
configuration and Handset Preference Group
membership. See “Handset Templates” on
page 88 or “Programmable Function Keys
(PFKs)” on page 82 for more information.
Yes Yes No
Add Call
Appearance
Enable creating another Call Appearance for
this phone. Multiple Call Appearances enable a
single phone to handle calls for users.
Yes No No
Reboot
Restart the phone. The reboot occurs after a
short delay on an idle phone. If the phone is in
use, the reboot starts when the phone is idle. A
Reboot Allworx Handsets button is available at
the top of the SIP Handsets section of the page
to reboot all Allworx phones with one action.
One handset reboots every 10 seconds, until all
phones reboot.
Yes Yes No