User`s guide

Allworx Server Administrator’s Guide Version 7.6
Page 62 1-866-ALLWORX * 585-421-3850
www.allworx.com
Revised: 11/22/13
view or change the password. Reboot the phone to complete the phone
replacement.
• Defer user assignment (LATER). If there is no existing phone configuration from
within the Web Admin page, the user assignment prompts display on
subsequent reboots.
• Assign via the Web Admin (VIA WEB). The user assignment prompt will not
display on subsequent reboots.
• When registering a Plug ’n’ Play phone with the server, it displays on the Phone
System > Handsets page in the SIP Handsets section with the correct model
and the MAC address.
10.1.8 Plug ’n’ Play Security
Allworx handset Plug ’n’ Play installation provides a convenient method for adding
phones to the Allworx server. However, this feature enable unauthorized users to add
phones to the server without the knowledge of the Allworx Server Administrator. The
Allworx System provides security by enabling the Allworx Server Administrator to disable
Plug ’n’ Play installation of handsets.
10.1.9 Add Allworx Phones Manually
Manually add phones to the system when disabling Plug-and-Play for security reasons
or to configure the phone prior to plugging into the network (for example: pre-configure
the server before an installation at the customer site).
Table 1: Available Features on the Servers > VoIP > Modify page
Feature Description
Disable Phone
Creates via LAN
Plug-and-Play
Prevent handsets on the Allworx server LAN from installing by Plug-and-Play. By
default, this feature is off - the system enables Plug-and-Play. When on,
manually add phones (Phone System > Handsets page).
Disable Phone
Creates via WAN
(Remote Phone)
Plug-and-Play
Prevent handsets on the Allworx server WAN (i.e. remote handsets) from
installing by Plug-and-Play, even when programming the remote handset with
the server Plug-and-Play secret key. By default, this option is off - the system
enables Plug-and-Play. When on, manually add phones (Phone System >
Handsets) page.
Disable Assign User at
Phone
Prevent assigning a user to a newly installed phone using the Plug-and-Play
User Assign menu on the phone.
Note: Previously added Handsets to the system re-register with the server,
regardless of these settings.