User`s guide

Allworx Server Administrator’s Guide Version 7.6
1-866-ALLWORX * 585-421-3850 Page 61
www.allworx.com
Revised: 11/22/13
7. Select a Handset Network Profiles Template.
8. Click Update to save the changes.
9. Reboot the phones in the Handset Preference Group. The phone reconnects
using the prior network settings. All subsequent reboots use the settings in the
Handset Network Profiles Template.
10. Navigate to Phone System > Handsets.
11. Reboot the phones.
• Allworx Phones - Click Reboot Allworx Phones to reboot all the phones in the
system
• Specific Phones - Locate the affected phones in the SIP Handsets list and click
Reboot in the action column.
10.1.7 Plug ’n’ Play Installation
The Allworx Server Administrator may add Allworx phones to the system using the
Plug-and-Play installation. After setting up the network connection to the server, the
phones register with the server during the next reboot or power up. To add VoIP phones
manually from other manufacturers, see “Generic SIP Phones” on page 66.
If there is difficulty configuring a phone, restore the phone to the factory defaults, and
then reapply the settings.
If rebooting an Allworx IP phone on the network and a new version of phone software is
available, the phone requests to load the upgrade.
Assign an Allworx IP phone to a user or replace an existing phone when first connecting
to the Allworx system. The following options are available:
• Assign a user to the phone (NOW > ADD). Select from the list of all system
users or limit the list to those users with no assigned phones. Reboot the phone
to complete the user assignment.
• Replace compatible existing Allworx phone (NOW > REPLACE). Select from
the list of the all Allworx system phones. The phone web administration
password, if any, is required to replace a phone. Navigate to Servers > VoIP to
Note:
Phone users can manually select a profile on their phones by selecting CONFIG >
Network Profiles and selecting a profile.