User`s guide

Allworx Server Administrator’s Guide Version 7.6
Page 60 1-866-ALLWORX * 585-421-3850
www.allworx.com
Revised: 11/22/13
8. Locate the Next Phone Reboot use: line, and click the modify link to select the
profile for the phone to use during the next reboot. The page displays a
drop-down list of the current profiles:
• Current Phone Settings
• Phone Archived Profile
• <Newly created profile(s)>
After creating a template, assign it to the phone using the Handset Preference
Groups. Follow the procedure (See “Handset Preference Groups” on page 72. for
more information).
1. Log in to the Allworx server admin page, navigate to the Phone System >
Handsets Page, and locate the handset in the table.
2. Click the corresponding View Configuration link. The View configuration dialog
box displays.
3. Locate the Handset Preference Group section, and click the Modify link.
4. Locate the Handset Preference Group section, and select the new template from
the list.
5. Click Update to save changes.
6. Navigate to the Phone System > Handsets Page. Locate the Handset Network
Profile Templates section.
Note:
Phone settings can override the Next Phone Reboot setting. To verify the Handset
Network setting takes effect:
• Press the CONFIG soft key on the phone.
• Press the down arrow key to highlight Preferences.
• Press the Select button .
• Press the down arrow key to highlight Server Profile Selection.
• Press the Select button . Two options display - Use Server Selection or Ignore
Server Selection.
• Select Use Server Selection enable the Handset Network Template setting to take
effect, and press the Select button .
• Press the EXIT soft key on the phone twice to get back to the main screen.
Note:
The system does not enable modifying default templates