User`s guide

Allworx Server Administrator’s Guide Version 7.6
1-866-ALLWORX * 585-421-3850 Page 59
www.allworx.com
Revised: 11/22/13
3. Use the arrow buttons and the Select button , configure the network settings.
4. Press the ARCHIVE soft key. This saves the current network settings as the
Archive profile.
The Archive profile is available even if changing the Network Settings and/or
rebooting the phone.
10.1.6 Server-based Profiles
The Allworx Server Administrator can create up to three Handset Network Profiles for
any phone on the server, and creates/assigns the templates containing the profiles to
Handset Preference Groups.
To create Templates:
1. Log in to the Allworx server admin page, navigate to Phone System > Handsets
page.
2. Locate the Handset Network Profile Templates section, and click the Copy link for
the Default template. This creates a new template.
3. Click the View link on the new template.
4. Click the modify link on the Template Name line to rename the template to a
more descriptive name, and then click the Update button.
5. Create a Network Settings Profile, click the add profile link.
6. Name the profile and fill in the settings.
7. Select Add for more profiles following the steps above.
Profile Description
Profile Name
The name can be different from the Template name and must be
different than any other profile name in this template.
Phone IP
Choices are DHCP and Use Phone Setting. It is not possible to assign a
static IP address to a phone using a Handset Network Profile.
Boot Server Address Enter a domain name rather than an IP address.
Time Server Address Enter a domain name rather than an IP address.