User`s guide

Allworx Server Administrator’s Guide Version 7.6
Page 44 1-866-ALLWORX * 585-421-3850
www.allworx.com
Revised: 11/22/13
2. Examine the installed Generic SIP phone User IDs.
3. Determine if the registration configuration for each Generic SIP phone is the
same or different from the current User ID on the server Handsets page. If there is
a difference, modify the on-phone configuration to match the new User ID.
7.4 Multi-site Calling
For reliable calling between sites in a multi-site network, all Allworx servers must have
the same software release, extension length, and internal dial plan.
Note:
Allworx user guides frequently refer to dialing patterns based on the factory default
Internal Dial Plan. After making changes to the dial plan, the My Allworx Manager Phone
Functions tab automatically updates to the new digits. Print and distribute this sheet to all
end users. Navigate toPhone System > Dial Plan to view the Phone Functions
Reference Card.
Note:
Changing the Operator to something other than “0” does not automatically change the
Operator digit shortcut in the Auto Attendants. If changing the Operator digit, manually
update the Auto Attendants shortcuts. To update manually, see “Auto Attendants” on
page 179.