User`s guide

Allworx Server Administrator’s Guide Version 7.6
1-866-ALLWORX * 585-421-3850 Page 37
www.allworx.com
Revised: 11/22/13
6 Virtual Private Network (VPN)
To enable the VPN PPTP server:
1. Log in to the Allworx server admin page, and navigate to Network > VPN. The
VPN page displays.
2. Click the Modify link to update the values.
3. Check the Enable VPN PPTP Server box and update the fields.
4. Enter the required information in the respective fields. Click the Start Over button
to reset the fields to the original settings.
5. Click Update to save changes.
6. Reboot the Allworx server.
To enable VPN for Individual Users:
1. Log in to the Allworx server admin page, and navigate to Business > Users. The
Users page displays.
2. Locate the username in the Users table, and click the Modify link. The Modify
dialog box displays.
3. Locate the VPN Settings section, and check the VPN Access box.
4. Enter a VPN password in the field, and then Confirm VPN Password in the next
field.
5. Click Update to save the changes.
Note:
It is necessary to restart the Allworx server for the new Network VPN settings to take
effect.