User`s guide

Allworx Server Administrator’s Guide Version 7.6
Page 30 1-866-ALLWORX * 585-421-3850
www.allworx.com
Revised: 11/22/13
For example, if a PC on the LAN is hosting a website that requires Internet accessibility,
the http port (port 80) must be exposed through the firewall. To enable access to this
web server, create a new entry, entering 80 for the WAN Port #. Select TCP for the
Protocol, enter the PC’s IP Address (e.g. 192.168.101.9) and the Local Port # of 80.
If exposing the port 80 of a PC on the LAN this way, disable the Allworx port 80 http
service. Uncheck the HTTP (80) checkbox in the Allworx Services section of the page. If
using the Allworx Internet web page, leave the Allworx HTTP box checked and change
the http port on the PC to another port number (e.g. port 5000).
Due to security requirements, do not use the Allworx server’s LAN IP address as an IP
Address, in the table above. To access the Allworx LAN interface from the Internet, use
the server’s VPN feature.
Note:
The WAN and LAN Port #s must always be the same.