User`s guide

Allworx Server Administrator’s Guide Version 7.6
Page 208 1-866-ALLWORX * 585-421-3850
www.allworx.com
Revised: 11/22/13
To export settings:
1. Log in to the Allworx server admin page, navigate to Maintenance > Import /
Export and locate the Export Configuration section.
2. Select from the following optional configuration settings:
• Phone System Settings
• Network Settings
• VoIP Server Settings
• SIP Proxy Settings
• Dial Plan Settings
3. Click Export to export the selected configurations. This places the current system
settings into an XML file.
4. Click the View link to save the exported XML file for import on to another system.
Verify the server that receives the imported configuration settings is “clean”,
meaning the system has none of the above configurations added prior to import.
Update the internal dial plan and extension length to match the configuration
being imported before the doing import.
32.2 Import
To load the exported configuration settings of one server onto another:
1. Log in to the Allworx server admin page, navigate to Maintenance > Import /
Export and locate the Import Configuration section.
2. Click Browse to locate the XML configuration file.
3. Enter the full pathname of the XML file into the Load a configuration file field, and
then click Load to begin loading the configuration file onto the server.
After loading the file, the import page displays all available configuration settings.