User`s guide

Allworx Server Administrator’s Guide Version 7.6
1-866-ALLWORX * 585-421-3850 Page 203
www.allworx.com
Revised: 11/22/13
that span multiple sites. For setting up Multi-site Paging, see the Allworx Advanced
Multi-site Setup Guide, Release 7.6.
30.2.4 Paging Zone Operation on Handsets
Add or remove each applicable line out and Allworx handset from each of the paging
zones. By default, the system enables each applicable line out and handset for Paging
Zone 0 and disables all others. The Allworx Server Administrator can enable or disable
the Paging Zones on the handset configuration page. The Allworx Server Administrator
can configure handsets to:
• Pages always accepted.
• Pages accepted only while on hook.
• Pages never accepted.
When changing the zones for a handset, it is necessary to reboot the handset for the
changes to take effect.