User`s guide

Allworx Server Administrator’s Guide Version 7.6
Page 202 1-866-ALLWORX * 585-421-3850
www.allworx.com
Revised: 11/22/13
• Paging Amplifier – automatically activates immediately preceding each
overhead page, and then turn back off once the page completes.
• Unconnected –completely disables the relay and it does not operate through
either mechanism.
30.2 Paging Zone Settings
30.2.1 Paging Zone Names
The Allworx Server Administrator can modify the name assigned to each of the Paging
Zones (0 - 9 and corresponding extensions 460 - 469
1
) to provide a meaningful
descriptive name.
To change the names of the zone:
1. Log in to the Allworx server admin page, navigate to Phone System > Paging,
and locate the Paging Zone Names section.
2. Click Modify to open the configuration page
3. Type a new description in the Name field corresponding to each Zone.
4. Click Update to save changes.
If changing the names of any Paging Zones, reboot any handsets with a PFK defined for
those Paging Zones. The handsets will not use the new name until rebooted.
30.2.2 Pre-page Tone
Configure each Paging Zone to play a tone before the paging message starts. The
system default tone is enabled. Users placing a page always hear a tone to indicate that
the channel is open to begin speaking.
30.2.3 Multi-site Paging
The Multi-site Paging Groups settings enable handsets to become part of paging zones
1. Extensions may vary per system. If using a non-default Internal Dial Plan, consult the My Allworx
manager to determine what extensions are in use for the corresponding feature.