User`s guide

Allworx Server Administrator’s Guide Version 7.6
1-866-ALLWORX * 585-421-3850 Page 153
www.allworx.com
Revised: 11/22/13
1. Repeat the Basic Routing procedure and the Ring Several Phones at Once (if
applicable), up to step 5 or a combination of the other procedures, select Follow
Me from the drop-down menu in the connection attempt field.
2. Enter 9
1
or 78
1
+PIN (to gain an outside connection) followed by the phone
number in the text box that appears to the right.
Examples†:9+1+aaa-xxx-nnnn, 9+1+xxx-nnnn, 78+ PIN+1+aaa-xxx-nnnn,
78+PIN+xxx-nnnn
3. Select the preferred number of rings. The Follow-Me-Anywhere feature requires
the recipient to listen to a message and enter a code. Therefore, increment the
normal number of rings by at least two in order to give the recipient extra time to
answer the call.
4. Click Update to save changes.
18.2 Caller ID Based Routes
Use the Caller ID of the incoming call to a User extension to determine the call route.
1. Click on the View Call Routes link, next to the User extension that is adding a
Caller ID-based route.
2. Click the add new Call Route link next to the configured presence.
3. Select the external calls or internal calls radio button.
4. Enter the phone number with area code in the text box for calls from external
numbers, or select the extension from the drop-down menu for calls from internal
extensions.
5. Use the other procedures (e.g. see Basic Routing) to develop the intended route
for the call.
6. Click Update to save changes.
1. Extensions may vary per system. If using a non-default Internal Dial Plan, consult the My Allworx
Manager Phone Functions tab to determine what extensions to use for the corresponding feature.