User`s guide

Allworx Server Administrator’s Guide Version 7.6
1-866-ALLWORX * 585-421-3850 Page 129
www.allworx.com
Revised: 11/22/13
14.6 Audit PIN Codes
The Audit PIN Codes requires users to use a PIN code when accessing an outside line.
The Allworx Server Administrator configures the handsets. To place a call from a
handset, the user dials 78 + PIN code + phone number. Example: when calling 555 1222
using PIN code 77777, the user dials the sequence 78 + 77777 + 5551212.
Limitations of the Audit PIN Codes feature:
• For use with an analog phone service connected to 6x and 24x servers.
• For use with a digital line service (T1) of the 24x servers.
• Not for use with site-to-site calls between 6x, 24x, and 48x servers.
To specify the number of digits and the service group affected:
1. Log in to the Allworx server admin page, navigate to Phone System > Dial Plan,
and locate the External Dialing Rules section.
2. Locate the services table, and click the modify link.
3. Locate to the PIN Code line and adjust the number of digits and the affected
Service Group.
4. Click the Update button to save the changes.
To create the PIN code:
1. Log in to the Allworx server admin page, navigate to Phone System > Audit PIN
Codes, and locate the Audit PIN Codes section.
2. Click the add new PIN code link.
3. Type the new PIN code and a PIN Code description in the respective fields.
4. Click the Add button to save the changes. The Audit PIN Codes page displays.
Note:
To change the PIN code length, the system cannot have any previously configured PIN
codes.