User`s guide

Allworx Server Administrator’s Guide Version 7.6
1-866-ALLWORX * 585-421-3850 Page 105
www.allworx.com
Revised: 11/22/13
User ID (SIP Proxy) The ITSP typically assigns this value and often the account phone number.
SIP Server
The DNS name or IP address of the proxy server to connect to provided by the
ITSP. The port number is usually 5060 but verify with the ITSP.
Outbound Proxy
DNS name or IP address of the outbound redirect server, if it differs from the SIP
Server. The system does not require this in many cases.
SIP Registration
Required
For use, if the SIP proxy server requires a SIP registration. The ITSP assigns the
Login ID and Password. If the ITSP uses a registrar server that is different from
the SIP proxy server, enter the DNS name or IP address of this server in the
Registrar name field.
Caller ID Name
Name used for outbound calls. Some ITSPs may ignore this or refuse calls if set.
If applicable, check the boxes:
• User External Caller ID Name from handset (if specified).
• User Caller ID Name from external sources (if received).
Caller ID Number
Number used for outbound calls. Some ITSPs may ignore or refuse calls if set. If
applicable, check the boxes:
• User External Caller ID Number from handset (if specified).
• User Caller ID Number from external sources (if received).
Maximum Active Calls
The Allworx server uses this number to limit the total number of the incoming
and outgoing active calls with this SIP Proxy. Useful for controlling the network
bandwidth, since Allworx assumes that the SIP proxy is not a LAN local service.
Number of Line
Appearances
Defines the number of Line Appearances for this Proxy so that Allworx creates a
virtual set of phone lines that mimic real physical analog phone lines on this
service. This is unique to Allworx and enables using ITSP services in a
conventional key system manner. Typically, this number matches the maximum
number of active calls limit (set above), but it can be less.
Note: Set a value of zero if Line Appearance functionality is not required.
Append Enterprise
Prefix to Dial back
number of incoming
calls.
Adds the enterprise dial plan digits (8 by default, *8 for extension mode) to the
beginning of the caller's extension of an inbound call from a proxy server. This
enables automatic dial back (e.g., selecting a call from the phone Calls list to
contact the original caller) to function properly when the proxy server requires
enterprise dialing for outbound calls.
Send Digits as Dialed
Indicate sending outbound numbers dialed exactly as on the handset placing the
call. The number converts into NANPA dialing form, so this box is not normally
checked. However, in some cases, the service provider or proxy may be doing
the conversion automatically and need to defeat the Allworx server’s conversion
mechanism.
Digits Sent
Number of dialed DTMF digits sent to the ITSP when making a call. If the
number specified here is fewer than the number of digits dialed by the user, only
the trailing digits are sent. The default value (all digits) is typical.
Default Language
(requires the Dual
Language Support
feature key)
The language usage choice for Allworx audio messages and played greetings
for inbound calls through the SIP Proxy.
Account Setting Description