User`s guide

Allworx Server Administrator’s Guide Version 7.6
1-866-ALLWORX * 585-421-3850 Page 101
www.allworx.com
Revised: 11/22/13
13 Outside Lines
Allworx servers support placing and receiving calls over the following line types:
13.1 Configure the CO Lines
1. Log in to the Allworx server admin page, navigate to Phone System > Outside
Lines.
2. Locate the Analog (CO) Line in the table, and click the corresponding Modify link.
The New FXO Line dialog box displays.
3. Update the appropriate analog (CO) line options.
Line Type 6x12 6x 24x 48x
POTS/CO X X X X
SIP Proxies X X X X
Allworx Tx Expanders X X X
SIP Gateways X X X
T1/PRI X X
T1/CAS - T1/RBS X X
NFAS X
Outside Line Description
Description DNIS display on phones that receive calls on this line.
Enable Line Appearance Enables configuring the handsets with Line Appearance PFKs for this line.
Default Language
Enables selecting a language for systems configured with multiple
languages to use with Auto Attendant and/or Queue prompts for inbound
callers.
Line has Caller ID Service Enables displaying the Caller ID information.
Enable Echo Cancellation Only disable at the request of Allworx Technical Support.
Optimize for short loops Check for FXD/IADs less than 500 feet away, not typically selected.
Prefix Digits
Enter automatically dialed digits on the line prior to dialed digits by handsets
placing outbound calls on this line.
CPC Disconnect timer Default 350 milliseconds
Pre-dial delay Typically 500 milliseconds