User`s guide

Allworx Server Administrator’s Guide Version 7.6
Page 92 1-866-ALLWORX * 585-421-3850
www.allworx.com
Revised: 11/22/13
3. Locate to the SIP Handsets section, and locate the template needing
modification. Click View Configuration.
4. Update the configuration.
5. Click the Save button in the Template Options section, and enter a new
description in the pop-up window. Click OK. This saves the template, and it is
available in the list of Handset Configuration Templates for the specific handset.
6. Navigate to Phone System > Handsets to return to the handset configuration
page.
11.8 Phone Web Administration
Access each handset through a web interface:
• View stored configuration information of the handset
• Modify the handset’s configuration and personal speed dials
• View information (event log, call history, phone configuration parameters)
The Phone Admin page has the same look and feel as the Allworx server admin page.
However, the password used to access the phone admin page is NOT the same.
To view the Phone Admin page password:
1. Log in to the Allworx server admin page, navigate to Servers > VoIP page.
2. Locate the Phone Administration line, and click the show link. Click the Modify
link to change the password.
There are two ways to access the administration page of an Allworx handset.
• From the Allworx server admin page, navigate to the Phone System >
Handsets page and then click the handset IP address link.
• From a browser, enter the IP address of the handset. Find the IP address using
the handset soft keys: CONFIG > Current Status > Info.
Note:
Users receive an error message when trying to use Allworx as the password. The system
does not accept Allworx as the password, enter another password.