User guide

System Administrator’s Guide – Release 7.5
______________________________________________________________________________________________
Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
Revised: April 9, 2013
Page 75
• No Reminder – Never remind the
user.
• On Hook – Beep whenever the
phone is put on-hook with call(s) on
hold.
• Timer – Beep after the call has
been on-hold for the specified
period.
• On Hook and Timer – Beeps after
the holding call for the specified
period or if placing the handset on
hook.
Hold Reminder
Timeout*
Length of time (in seconds) a call is on
hold before the call beeps, if Hold
Reminder mode is Timer. If Hold
Reminder is another option, the Hold
Reminder Timeout is unavailable.
Yes No
Jitter Buffer Size Variation in network audio packet the
phone experiences latency, resulting in
a reduction in audio quality. The phone
uses a jitter buffer to maximize the
audio quality when jitter occurs. Use
this configuration parameter to alter the
size of the jitter buffer.
Yes No
Message
Waiting
Indication
Indicates how the phone should display
indication of a voicemail message
waiting for the user who is the owner of
this handset. If the station has no
owner, then this setting has no
meaning. The possible settings are:
• No Indication - The handset does
not provide a visual display that a
message is available.
• Visual – The red LED indicator on
the Messages button is illuminated.
• Stutter Dial Tone – The station
emits a stutter when a dial tone is
started for each call.
• Both – The station provides a visual
indicator and a stutter dial tone
Yes No
Messages
Button
Operation*
Controls the behavior of the phone’s
Messages Button:
• Displays Messages List – Pressing
the Messages button will permit
viewing the voicemail and managed
using the phone’s display. Pressing
the Messages button a second time
will call the Message Center so
audio menus can be used to
manage voicemail.
Yes No