User guide

System Administrator’s Guide – Release 7.5
______________________________________________________________________________________________
Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
Revised: April 9, 2013
Page 74
the handset user’s privacy.
Clock Mode* Specifies the phone station displays the
idle screen clock in 12- hour or 24-hour
format. There is an option to disable the
clock display if the phone is not
synchronized to network time or the
handset user does not need the time to
be displayed
Yes No
Codec
Preference
Order
Set the preferred codec order in the
phone. The codec is the method of
encoding/decoding the audio sent to
and received by the phone. The two
possible codec’s are G.711 and
G.729A. G.711 preserves voice quality,
but takes more bandwidth. G.729A
takes less bandwidth, but reduces voice
quality.
Note: This setting defines the order of
codec selection. Not all codec’s are
supported for all call types (for example,
accessing the server Auto Attendant
requires G.711). The phone will attempt
to use the first choice but will use
whichever codec is required to support
the call.
Yes Yes
Daylight Saving
Time
Specify if the handset will use Daylight
Savings Time (DST) to compute its
local time. Select use current server
setting if the telephone is in the same
time zone as the server. For a remote
phone, you may want to use the DST
setting of its actual location
Yes No
Hold Button
Mode*
Controls the behavior of the phone’s
Hold button:
• Hold Calls, Park Lines – Holds calls
on call appearances. Parks calls on
line appearances.
• Hold then Park – If pressed and
released quickly, the call is held. If
the button is pressed for longer, the
call is parked.
• Park then Hold – If pressed and
released quickly, the call is parked.
If the button is pressed for longer,
the call is held
Yes No
Hold Reminder
Mode*
Specifies how the phone operates
relative to a hold reminder. Hold
reminder is a feature to remind the
handset user that they have left a
phone on hold:
Yes No