User guide

System Administrator’s Guide – Release 7.5
______________________________________________________________________________________________
Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
Revised: April 9, 2013
Page 60
6. Name the profile and fill in the desired settings.
Profile Description
Profile Name The name can be different from the Template name and must be
different than any other profile name in this template.
Phone IP Choices are DHCP and Use Phone Setting. It is not possible to
assign a static IP address to a phone using a Handset Network
Profile.
Boot Server
Address
A domain name may be entered rather than an IP address.
Time Server
Address
A domain name may be entered rather than an IP address
7. Select Add. Add more profiles in the same way, if desired.
8. Go to Next Phone Reboot use and click the modify link to choose which
profile will be used by the phone on its next reboot. A drop-down list of the
current profiles is provided:
• Current Phone Settings
• Phone Archived Profile
• Any newly created profile(s)
Note: Phone settings can override the Next Phone Reboot setting. To verify the Handset
Network setting takes effect:
9. Press the CONFIG soft key on the phone.
10. Press the down arrow key to highlight Preferences.
11. Press the Select button .
12. Press the down arrow key to highlight Server Profile Selection.
13. Press the Select button . Two options display - Use Server Selection or
Ignore Server Selection.
14. Verify Use Server Selection is highlighted to permit the Handset Network
Template setting to take effect, and press the Select button .
15. Press the EXIT soft key on the phone twice to get back to the main screen.
After creating a template, assign it to the phone using the Handset
Preference Groups. Perform the following procedure (See Handset
Preference Groups on page 71 for more information):
Note: Default templates cannot be modified.