User guide

System Administrator’s Guide – Release 7.5
______________________________________________________________________________________________
Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
Revised: April 9, 2013
Page 37
6 VPN
This page displays the system’s Virtual Private Network settings.
NOTE: It is necessary to restart the Allworx server for the new Network VPN settings to
take effect.
To enable the VPN PPTP server:
1. Navigate to Network > VPN. The VPN page displays.
2. Click the Modify link to update the values.
3. Check the Enable VPN PPTP Server box and update the fields.
4. Enter the required information in the respective fields. If you make a mistake,
click the Start Over button to reset the fields to the original settings.
5. Click Update to save changes.
6. Reboot the Allworx server. 0.
To enabling VPN for Individual Users:
1. Go to Business > Users. The Users page displays.
2. Locate the username in the Users table, and click the Modify link. The Modify
dialog box displays.
3. Locate the VPN Settings section, and check the Allow VPN Access box.
4. Enter a VPN password in the field, and then Confirm VPN Password in the
next field.
5. Click Update to save the changes. 0.