User`s guide

System Administrator’s Guide – Release 7.2.3.x
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2010 Allworx Corp. All rights reserved. Allworx, a wholly owned subsidiary of PAETEC Holding. All other names may be trademarks or registered
trademarks of their respective owners.
Revised: September 1, 2010
Page 82
2. Select the backup to export.
3. Enter then name for this exported backup: <Export Name>.
4. Select the export folder: <Export Folder>.
5. Select OK to start the export operation.
The full path of the export destination will be <Export Folder>\<Export Name>; in the above example the
destination will be \AllWorxServerExport\Allworx_2005-11-23. The combination of export name and folder
location must be unique for each export operation.
13.4.2 Import Backup Files
Import transfers a previously exported backup into this OfficeSafe installation so that it can be used to restore
a local Allworx
server.
1. Select Import Backup under Backup.
2. Select the folder to import the backup from.
Note: If the export is in its original location, then the full path will be the export name appended to the
export folder (in the above export example this would be \AllWorxServerExport\Allworx_2005-11-
23).
3. Select OK to start the export.
4. When the import is completed, it will be ready to use for restores.