User`s guide

System Administrator’s Guide – Release 7.2.3.x

300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com

trademarks of their respective owners.

Revised: September 1, 2010

Page 81

gigabytes of data to recover. You will see a “Restore was successful” message in the Status pane on

the Safe Mode page when the operation completes.

8. Select Reboot in Normal Mode and click the Reboot button.

Caution: Do NOT select Reboot the Allworx server in Normal Mode with Factory Defaults restored. This

will cause your restored settings to be lost during the reboot. If you do this by accident, you will

want to start the entire restore operation over again.

9. When the Allworx server has restarted, reconnect your LAN devices and log in to the server.

10. Verify that the data has been restored successfully.

13.3 Server-to-Server Backup and Restore

Backup and restore can be performed from one server to another. This allows a standard backup image to be

loaded onto multiple servers or replicate an existing server. Using the procedure described above, simply

perform a backup from one server and then use this backup to perform a restore onto a different server.

13.4 Exporting and Importing Backup Files

OfficeSafe manages all server backup data for you. When you need to archive this data onto other media (i.e.

DVD), store in a network location, or send the data to another site (i.e. so it can be used to replicate a server

at the other site), use the OfficeSafe export and import features.

13.4.1 Export Backup Files

Export creates an external copy of an OfficeSafe backup such that it can be imported later into this or another

OfficeSafe installation.

1. Select Export Backup under Backup.