User`s guide

System Administrator’s Guide – Release 7.2.3.x
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2010 Allworx Corp. All rights reserved. Allworx, a wholly owned subsidiary of PAETEC Holding. All other names may be trademarks or registered
trademarks of their respective owners.
Revised: September 1, 2010
Page 79
2. On the Allworx server side, you need to restart the server system into Safe Mode. This can be done via
the web administration page of the server or by forcing the system into Safe Mode via the front panel of
the unit. The method used to force entry into Safe Mode via the front panel varies by product model.
Consult the installation or troubleshooting guides for your specific product model for more details. The
procedure for restarting into Safe Mode from the server application is the same for all product models
and is accessed via the Maintenance / Restart page on the web administration interface.
1. Select Enter Safe Mode after restart.
2. Click Restart.
3. Type SAFEMODE into the pop-up window.
4. The Allworx server will power down and then power back up in Safe Mode.