User`s guide

System Administrator’s Guide – Release 7.2.3.x
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2010 Allworx Corp. All rights reserved. Allworx, a wholly owned subsidiary of PAETEC Holding. All other names may be trademarks or registered
trademarks of their respective owners.
Revised: September 1, 2010
Page 49
10 Outside Lines
10.1
Anonymous Call Handling
Anonymous Call Handling provides the System Administrator with a way to handle calls for which the caller
has requested privacy. Such calls can be routed to a specific extension.
Navigate to Phone System / Outside Lines and select the modify link to configure Anonymous Call Handling.
Private calls can either be routed normally on the system or to any user or system extension, including the
operator.
Note: Not all ITSPs support Anonymous Call Handling.
10.2 Allworx Port Expanders
The Allworx Px 6/2 Expander provides expansion of the system’s analog capability by adding six (6) FXO and
two (2) FXS ports to any Allworx server. The Px 6/2 Expander features plug-and-play installation for locally-
connected units. Remote installation is possible using an approach similar to installing remote Allworx
phones. For detailed installation instructions, see the Allworx Px 6/2 Expander Installation Guide.
Settings that apply to the port expander, overall are available on the Port Expanders page. Use the following
information to configure these settings on installed Allworx Px 6/2 Expanders:
To configure Allworx port expanders, go to the Port Expanders section of the Network page.
This shows a list of all Allworx port expanders known to the Allworx server. A number of functions are
available by clicking port expander-specific links.