User`s guide

System Administrator’s Guide – Release 7.2.3.x
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2010 Allworx Corp. All rights reserved. Allworx, a wholly owned subsidiary of PAETEC Holding. All other names may be trademarks or registered
trademarks of their respective owners.
Revised: September 1, 2010
Page 10
4.3 Activating Server Software
Once software has been loaded onto the Allworx server, using either option explained above, the System
Administrator can immediately activate the update, schedule the update to be activated at a later time, or
cancel the update procedure.
To schedule an update for a later time, select the Activate Update Later button. Enter the number of hours
the server should wait before activating the update into the text box and then click the Submit Schedule
button. The Update page will display the date and time the update is scheduled to occur.
4.4 Options after upgrading to 7.2
Once a system has been upgraded to Release 7.2, additional options are available for subsequent upgrades:
• Reboot All Phones – Choosing this option will cause all attached phones to reboot automatically after
the upgrade is complete. One phone will reboot every 10 seconds until all have been rebooted.
• Automatically update phone firmware – Choosing this option will cause all rebooted phones to
automatically install the phone firmware upgrade if the just-installed server load includes a newer
phone version. The phone will allow five minutes for a user to cancel the upgrade using a phone
softkey before installing the update.