User`s guide

System Administrator’s Guide – Release 7.2.3.x
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2010 Allworx Corp. All rights reserved. Allworx, a wholly owned subsidiary of PAETEC Holding. All other names may be trademarks or registered
trademarks of their respective owners.
Revised: September 1, 2010
Page 122
6. Set the particular Parking Orbit (701 – 709
†
) that this PFK is to monitor. A station that is configured to
monitor only a subset of parking orbits should start with 701 and work its way up so that the mostly
commonly assigned orbits will always be available.
7. Set the Reminder Duration to ring the handset upon call being parked for this elapsed time (enter 0 to
disable the reminder or enter a time period from 10 to 600 seconds).
8. Select Done to complete the assignment of the PFK settings.
9. Select Update to save all PFK assignments.
As always, for the above changes to take affect, the associated phone station must be rebooted. See the
phone configuration section for all other details about phone configuration.
Analog, Allworx, and 3
rd
-party IP phones can be used to park and retrieve calls. However, only Allworx IP
phones can be configured to live-monitor Parking Orbits and support parked call reminders. Additionally,
Allworx IP phones are configurable so the station’s HOLD button can be used to automatically do either local
station HOLD operations or automatic PARK operations with a minimal number of manual steps.
Note: The only option for parking calls using analog phones or 3
rd
-party IP phones is to perform an
announced location park by transferring the call to extension 700
†
.
†
Extensions may vary per system. If you are using a non-default Internal Dial Plan, consult the Phone Features tab of the
My Allworx Manager page to determine what extensions are being used for the corresponding feature.