User`s guide

System Administrator’s Guide – Release 7.2.3.x
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2010 Allworx Corp. All rights reserved. Allworx, a wholly owned subsidiary of PAETEC Holding. All other names may be trademarks or registered
trademarks of their respective owners.
Revised: September 1, 2010
Page 104
• SIP Gateway
Below is the Modify window for a T1/PRI Digital Line.
Click on ”Routed using DID Block(s)” and check the block or blocks to use for this outside line.
Note: For Digital lines, this must be done for each channel. If all channels will use the same settings, select
“Apply settings for this line to all lines with the same Port”.