User`s guide

System Administrator’s Guide – Release 7.2.3.x
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2010 Allworx Corp. All rights reserved. Allworx, a wholly owned subsidiary of PAETEC Holding. All other names may be trademarks or registered
trademarks of their respective owners.
Revised: September 1, 2010
Page 103
Find the Plan parameter value in the Direct Inward Dial Routing Plans section on the Phone System / Outside
Lines page. To configure the routing plan, click on the Details
link.
The routing plan specifies a mapping for each DID phone number to an Allworx
server extension. The plan
also permits entry of a Dialed Number Identification Service (DNIS) name for each phone number. The DNIS
name will be displayed on the recipient’s Allworx phone. If no DNIS name is entered, the originally dialed
number will be displayed on the phone. The Default Extension will be used as the mapping for any phone
numbers not specified in the Phone Number to Extension Mapping list.
19.3 Create the DID Lines
The last step in configuring the DID lines is to configure each of the incoming lines that will use DID blocks.
DID blocks can be used by the following line types:
• T1/PRI
• T1/RBS
• SIP Proxy