User`s guide
System Administrator’s Guide – Release 7.2.3.x
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2010 Allworx Corp. All rights reserved. Allworx, a wholly owned subsidiary of PAETEC Holding. All other names may be trademarks or registered
trademarks of their respective owners.
Revised: September 1, 2010
Page 94
15.7 Day & Night Routing
System Extensions can be configured to follow one call route when the Allworx System is in Day Mode and
another when the System is in Night mode. (See Section 22, Day-Night Mode, for more information).
1. Follow the Basic Routing procedure to set up the Day Mode call route for the extension. Once the
Extensions page is displayed, select the View Call Routes
link (See Figure 16).
2. Select the Modify link in the Extension Information section.
3. Enable the Use different call routes for Day and Night modes checkbox and then click the Update
button.
4. Select the Modify
link in the Night mode section. Use the other procedures to develop the intended route
for the extension.
5. Once satisfied with the call route selections, click the Update button at the bottom of the page. To see
the button, scrolling down may be required.
15.8 Changing a User’s Presence Setting
15.8.1 Changing Presence via an Allworx
IP Phone
When the Mute/DND button is held down for greater than one second, a presence menu will appear. Scroll to
the desired presence setting and then press the Select button. See the Allworx Phone Guide for more
information.
15.8.2 Changing Presence via the Allworx Message Center
1. Access the Allworx Message Center by either pressing the Message button on an Allworx handset,
dialing extension 404
†
, or by dialing 6
†
+ extension.
2. Select option 4 ‘To Change Your Message Center System Settings’.
3. Press 1 ‘To Change Your Presence Setting’.
See the Allworx User Guide for more information.
15.8.3 Changing Presence via the My Allworx Manager page
1. Open a web browser and enter the Allworx server’s LAN IP address into the address field.
Default: http://192.168.2.254
†
Extensions may vary per system. If you are using a non-default Internal Dial Plan, consult the Phone Features tab of the
My Allworx Manager page to determine what extensions are being used for the corresponding feature.