Operation Manual

10
Quick Guide
Power on
Press and hold “ ” button for 3 seconds to power on the device.
It takes about a minute and half to boot the system. After system boot
is completed, it will enter Android desktop. Slide upwards the
“ “bar on the Tap screen to unlock the screen to start to use the
device.
Power Save mode and Lockscreen
You can turn off the screen and mute the volume to save power by
pressing the “ ” button shortly. Press the “ ” button shortly
again to reactivate the device. The screen will turn to Lockscreen
mode and the primary operation of the device will continue.
Unlock the screen by sliding Slide upwards the “ “bar on the Tap
screen to resume to status before power saving.