Instruction Manual

16
Th TV will go into Standby mode if it receives
no response in a few minutes.
No video (PC mode)
Please check if the cable is connected to the
VGA port correctly, or if the cable is bent in
some places.
Vertical line blinking (PC
mode)
Enter the main menu, and adjust the vertical
placement to eliminate the vertical line.
Horizontal tearing (PC mode)
Adjust the horizontal placement of the screen
to cleat any horizontal lines.
Screen is too bright or dark (PC
mode)
Adjust the brightness or contrast in the main
menu.
No response from the PC
Check if the PC’s display resolution is set to a
compatible resolution for the TV.
Lines appearing when a device
is connected to the RCA port
Make sure you are using a cable in good
quality.
Problems are not solved
Unplug the power cable and wait for 30
seconds, then reconnect to the socket.
If problems still persist, do not attempt to
repair the TV by yourself. Kindly contact the
service center.
Note: Do not leave your TV displaying a static image, whether it is from a
paused video, menu screen, a.s.o., for an extended period of time, doing
so will damage the display and may cause image burn in.