Instruction Manual

15
Troubleshooting
Case
Solution
No power
Check if the AC cord of TV is plugged in or not.
If there is still no power, please disconnect the
plug, and reconnect to the socket after 60
seconds. Turn the power back on.
Signal not received properly
Double or phantom images may appear on
your TV if there are high buildings or
mountains close to where you are. You can
adjust the image by manual operation:
consult instruction of vernier regulation, or
adjust the direction of the external antenna.
If you use indoor antenna, signal reception
may be more difficult under certain
circumstances. Adjust the direction of the
antenna for optimum reception. If this does
not improve reception, you may have to
switch to an external antenna.
No picture
Check if antenna at the back of the TV is
connected properly.
View other channels to see if the problem still
occurs.
Video appears with no audio
Try to increase the volume.
Check if the TV’s sound is on mute or not.
Audio is present, but video
does not appear or is
discolored
Try adjusting the contrast and brightness.
Static noise affects video and
audio quality
Check if the antenna at the back of the TV is
connected properly.
Broken lines on screen
Electrical appliances such as hair dryers or
vacuums a.s.o. may be interfering with your
TV set. Switch these appliances off.
Remote control does not work
Make sure the plastic bag which came with
the remote is removed.
Try using the remote in a shorter distance
from the TV. Check if the placement of the
batteries is correct, or try using new batteries
with the remote control.