Instructions / Assembly

To assemble the faucet valves, first install one rubber washer, steel washer, and retaining nut on faucet valve
body in order shown (parts 5,6 and 7). Push faucet valve body (3) from bottom through correct hole in tub
deck (4) and install second rubber washer, steel washer and retaining nut (5,6,7). Do not overtighten.
Screw on chrome retaining ring (2), being careful not to damage the tub’s finish. Attach faucet handle (1).
Note: It may be necessary to remove small plastic cap (8) in the side of the handle, to access the screw
which holds the faucet on. There is a hexagonal wrench provided in the faucet kit for this purpose. Repeat
procedure with second faucet valve.
FAUCET ASSEMBLY (cont.)
1. Faucet handle
2. Chrome retaining ring
3. Faucet valve body
4. Tub deck
5. Retaining nut
6. Steel washer
7. Rubber washer
8. Cap and Attachment Screw
4
1
2
3
5
6
7
7
6
5
8
1
2
3
4
7
6
5
5
6
7
8
9