Instructions / Assembly

CONTROL PANEL
Once your Walk-In Bathtub is assembled and in-
stalled the operation is simple. On the inside wall
of the tub you will see a control panel like the one
shown at right and below. There are three buttons
which control the functions of the tub.
OPERATION (Jetted Bathtubs Only)
16
First, turn on the power to the tub by pressing the On-Off button.
The indicator light on the button will illuminate, signifying that the tub has been turned on.
To activate the air jets, press the Air Jet switch.
To activate the water massage jets, press the Water Jet switch. Note: This will automatically
activate the Inline Heater function to help maintain the water temperature at a comfortable
level.
To turn off any or all functions, including the power, simply press the switch again.
All three buttons have indicator lights to show that they are in operation.
On-Off Switch
Water
Jet
Switch
Air
Jet
Switch