Use And Care Manual

ESR-1381
|
Most Widely Accepted and Trusted Page 3 of 7
8.3 Description:
See Section 3.0.
8.4 Installation:
8.4.1 General: See Section 4.1, except a weather-
resistive barrier complying with Section 1402.1 of the UBC
must be installed under the MaxiPanel exterior wall siding
products.
8.4.2 Siding:
8.4.2.1 MaxiPanel and MaxiSoffit: See Section 4.2.1.
8.4.2.2 MaxiPlank: See Section 4.2.2.
8.4.2.3 MultiShake: See Section 4.2.3.
8.4.3 MaxiBacker: See Section 4.3.
8.4.4 Wind Resistance: The design wind speeds must
not exceed the maximum basic wind speeds shown in
Table 2 of this report. Resistance to wind loads is also
determined by the structural capacity of the substrate.
8.5 Conditions of Use:
8.5.1 See Section 5.1.
8.5.2 A weather-resistive barrier complying with the UBC
as applicable, must be installed under the MaxiPanel
exterior wall siding products.
8.5.3 See Section 5.3.
8.5.4 See Section 5.4.
8.5.5 See Section 5.6.
8.6 Evidence Submitted:
See Section 6.0.
8.7 Identification:
See Section 7.0.
TABLE 1—DIMENSIONS OF MAXIPANEL, MAXIPLANK AND MULTISHAKE PRODUCTS
PRODUCT
WIDTH (inches)
LENGTH (feet)
THICKNESS (inch)
MaxiPanel
48
8, 9, 10, 12
5
/
16
,
7
/
16
MaxiSoffit
12, 16, 24, 48
8,10, 12
1
/
4
MaxiPlank
5
1
/
4
, 6
1
/
4
,7
1
/
4
, 8
1
/
4
, 9
1
/
4
, 12
12
5
/
16
MaxiBacker
36, 48
4, 5, 8, 9, 10
1
/
4
,
1
/
2
5
/
16
MultiShake
16
4
1
/
4
For SI: 1 inch = 25.4 mm, 1 foot = 304.8 mm.