Installation Instructions

Allura Fiber Cement Siding Installaon Manual
65
To i n s t a l l f i b e r c e m e n t b a t t e n s :
 Paint or stain cut edges.
 se orrosion resistant otdied galanied nails min  ga  ead
 Ensure that nails penetrate through the siding and at least 1” into solid wood.
 Position fasteners no closer than 1” from the sides of the batten and no closer than
2” from the end.
 For battens  ide or less asten on alternate sides o te batten saed no
more than 24” o.c.
 For battens 4” wide or more, apply two fasteners, one on each side of the batten,
spaced no more than 16” o.c.
Board and Batten Joint
NOTE: DO NOT seal the back of fiber cement battens.
NOTE: Vertical panels can be hung horizontally provided you flash the joints and
follow the fastening schedule.
Secon 13: Sot
Before you install fiber cement soffit, review and comply with all local building codes
and regulations regarding wall construction, including the proper use of sheathings,
framing, weather-resistant barriers, flashings, and other building materials and systems.
NOTE: Do not use vertical siding as soffit—it is too heavy.