Installation Instructions
Allura Fiber Cement Siding Installaon Manual
17
Proper Storage: Store covered, on pallets.
Do not store Allura Fiber Cement Siding or trim directly on the ground. If a covered
area such as a garage is not available on the jobsite, place pallets on wood blocks
to allow air flow underneath the pallet.
If palletized fiber cement is to be placed on a damp surface, place a vapor barrier
on the ground underneath the pallet.
Use the plastic bonnet provided to keep the product dry and prevent moisture
from settling on the siding. If you expect snow or rain, cover the bonnet
with a tarp.
Improper Storage
If the siding is packaged with slip sheeting, ensure that the slip sheeting stays
between the boards to protect against marring the surface, boards sticking
together, and moisture.
NOTE: Pay particular attention to the top two or three rows of siding on the pallet,
as these boards are more likely than others to absorb moisture. For best results, we
suggest you not install the top two or three rows of siding on a pallet until you are
absolutely certain that they are dry.
NOTE: Wet boards are visibly darker in color, while dry boards are a lighter grey tone.
NOTE: Many issues can be traced back to storage and handling issues. Best practice is
to put an additional layer of plastic or a tarp over the pallets when they are on site.