Installation Instructions

INSTALLATION:

 MaxiSOFFIT
TM
panels must be fastened to a solid, nailable substrate such as wood 2x subfascia.
 Additional framing may be needed to ensure proper fastening.


 An insect screen can be installed using building adhesive, but the net ventilation will be reduced.
JOINTING METHODS:
 Install Max iSOFFIT
TM
panels in moderate contact at ends or leave 1/8” gap and caulk.
 Maintain a minimum 1” gap between gutter end caps and siding & trim.
KICKOUT FLASHING:
 Because of the volume of water that can pour down a sloped roof, one of the most critical ashing details
occurs where a roof intersects a sidewall.
 The roo
ashed with st ashing. Where the roof terminates, install a kickout of su cient length
and in a direct angle that allows the water to run down the roof, away from the siding.
 It is best to install a self-adhering membrane on the wall before the subfascia and trim boards are nailed in
place, and then come back to install the kickout.
4 MaxiSOFFIT
TM
| www.maxitile.com