Installation Instructions

Allura Fiber Cement Siding Installaon Manual
44
3. ails must enetrate a minimum o  into te strutural raming sres reuire
 enetration enetration ma inlude tiness o strutural rated seating
(OSB or plywood).
4. Do not over drive the fasteners. Seating fasteners below the surface of the siding
reduces their holding power and creates an entryway for moisture. Do not place
fasteners in the center, unsupported area of the siding.
5. If you are hand nailing or using screws, it may be necessary to predrill to help
prevent the corners from breaking.
6. Fasten from one end of the panel to the other.
Face Fastening Detail
Installation
Mark a Starting Chalk Line
Establish a straight, level reference line to guide the positioning of the starter strip and
the first course of siding.