User's Manual

6
3.1.2 Activating Process
The PLOMO-500 unit can be activated by following steps:
Figure 3-1-2 Activating process
NOTE1: The GPS receiver in PLOMO-500 will be activated (cold start) while pressing the
ON button.
NOTE2: The LED flashing is compiled by Mores-code “SOS” every 30 seconds.
PLOMO-500 will transmit SRM with the latest GPS fixed position every 1 minute.
The Green or Orange LED of indicator depends on whether GPS position is
fixed.
NOTE3: The protection cover cannot be re-installed once pulled out and broken.
For cover and battery replacement, please refer to Section 4.4 Replacement.
Step 3:
The indicator will flash
● Orange LED first for
GPS searching and then
flash ●Green LED while
GPS position is fixed
Step 2:
Hold “ON” button
for 2 seconds
Step 1:
Please pull and break the red
protection cover in order to reveal
Activation Function Panel.