User's Manual

CPA/TCPA

CPA (nm)

TCPA (min)

[05 ]

[ 10 ]

Save data?

YES

MESSAGES

AIS STATUS

SHIP SETTING

SYS CONFIG

INITIAL

MAIN MENU

TRANSCEIVER

ALARM

<OFF>

Step 5: When the set up is completed, press the <ESC> or <ENT> key and a pop out window

will appear to confirm and save the setting.

Step 6: Select “YES” to confirm and save the data or “NO” to escape this menu.

*NOTE: MMSI can only be entered ONCE. Make sure that the MMSI is correct before entering

it.

5.6.3 CPA/TCPA Settings (User Password Protected)

Step 1: Select the “CPA/TCPA” function.

Step 2: A password is required. Enter the password in the pop out window.

Step 3: On the “CPA/TCPA” page, CPA (Closest Point of Approach) in nm and TCPA (Time to

Closest Point of Approach) in minute can be set.

Step 4: Press the <ESC> or <ENT> key to confirm again and a pop out window will appear.

Step 5: Select “YES” to confirm and save the data or “NO” to escape this menu.

INITIAL

PASSWORD

MMSI

CPA/TCPA