User's Manual

Latitude

Longitude

Center position of radar view

[00]∘[00]’[00]” <E>

[000]∘[00]’[00]” <N>

MESSAGES

AIS STATUS

SHIP SETTING

SYS CONFIG

INITIAL

MAIN MENU

TRANSCEIVER

RADAR VIEW SETTING

5.5.2 Radar View Reference Point Setting

When there is no GPS reception, manually set own ship‟s longitude and latitude in the “RADAR

VIEW” function, the own ship‟s reference center position will appear in the radar plotter.

Step 1: Select the “RADAR VIEW” function.

Step 2: Press the <ENT> key to display the radar view setting.

Step 3: Use the <UP> and <DOWN> keys to enter the “Longitude” and “Latitude” value. Use

the <LEFT> and <RIGHT> keys to move the digit spot of “Longitude” and “Latitude”.

Step 4: Press <ESC> or <ENT> key, and a pop out window will appear to confirm and save the

settings.

Step 5: Select “YES” to confirm and save the settings, or “NO” to escape from the menu.

*NOTE 1: Refer to section 5.4 for details on arrow keys instruction. .

SYS CONFIG

CUSTOMIZE

RADAR VIEW

FACTORY

BAUD RATE