User's Manual

32
 MESSAGES:
History of received and transmitted SRM is stored in the “MESSAGES” function. Up to 20
latest SRM can be stored in the “MESSAGES” function. Use the <SRM> key to access the
“MESSAGES” function, or access the “MESSAGES” function from the main menu by
selecting “MESSAGES” and then select type of SRM to transmit.
(Refer to section 5.1 for details)
 AIS STATUS:
Display all types of voyage information from ships in the surroundings that are equipped
with Class A, Class B, or other AIS systems. The voyage information includes dynamic and
static information. (Refer to section 5.2 for details)
 SHIP SETTING:
The following information can be set and entered in the “SHIP SETTING”,
Ship‟s information:
Ship name, ship size, type of ship, and etc.
Friend ship information:
The ship that is added as a friend ship with its MMIS and ship name will be shown in the
“BUDDY LIST.” (Refer to section 5.3.3 for details)
 TRANSCEIVER:
Turn ON or OFF the transceiver function. When the transceiver is turned OFF, the AIS
system only has receiving function and operates as an AIS receiver. When the transceiver
is turned ON, the AIS will have full Class B AIS function.
(Refer to section 5.4 for details)
 SYS CONFIG:
System configuration includes customized set up, radar view set up, factory default setup,
and desired baud rate set up. (Refer to section5.5 for details)
 INITIAL:
Initial function includes setup up for password, MMSI and CPA / TCPA.
(Refer to section 5.6 for details)