User's Manual

11
10
8
II. Interface Connection
9
5
When the mounting bracket and the CAMINO-201 are aligned, insert the
knob thru the Spring Washer , the Washer , then the body joint
till it click on the mounting bracket joint as shown in Figure 2-2-2-5.
Step 4:
8
9
5
Step 5:
‧Knob should be placed outside of the body joint .
‧Spring Washer and Washer should be placed outside of the body
joint in the order as shown in Figure 2-2-2-5.
8
4
9
10
Step 6:
Tighten up the Knob to fix the angle of the CAMINO-201.
Loosen the Knob to adjust the angle of the CAMINO-201
(Refer to Figure 2-2-2-5)
8
Figure 2-2-2-5 Installation instruction
4
4
8
4