User's Manual

44
“Log”: Click on “Log”, and the window is shown as the below picture. (Refer to figure
4-3-2-2-2). Select “Enable Log” to display the collected data in the box. Click on
to save the data, click on to delete it.
Figure 4-3-2-2-2 Message Log
4.3.2.3 Config
Click on “Config”, and the window is shown as the below picture. (Refer to figure
4-3-2-3-1)
Figure 4-3-2-3-1 Menu Tree under Config
“Manual positioning”: User can manually enter the position of your vessel as the center of the
Radar display when GPS position is unavailable (Refer to figure
4-3-2-3-2). Click on to complete the setting.