User's Manual

43
4.3.2.2 View
Click on “View”, and the window is shown as the below picture. (Refer to figure 4-3-2-2-1)
Figure 4-3-2-2-1 Menu Tree under View
“Target Monitor”: Click on it to monitor the vessel information of the selected target.
“Center View”: There are two scenario under this viewing mode, 1) without GPS data input 2)
with GPS data input. Without GPS input, user may select this viewing mode;
the viewer would calculate the rough position and set your own ship at the
center of the Radar display. User may also set the own ship position manually
(refer to Section 4.3.2.3 “Manual positioning”). Please refer to Section
4.3.1.1 “Radar View” for more viewing options. Under the situation with GPS
input, the viewer will set your own ship as the center of the Radar display
automatically and the “Center View” would be invalid.
“Radar Range Scale”: Click on it to show the radar range scale on the radar view.
“Tracks”: Click on it to see the tracks of the vessels.